FlightGear - Création d'avions et autres / Creation of aircraft and other

Vous désirez aider à améliorer les avions de Hangar de Helijah, c'est ici que cela se passe / You would like to help improving aircraft from Helijah's hangar, this is where it happens

Vous n'êtes pas identifié(e).

#1 2013-06-21 08:37:19

cpt Goosnen
Créateur
Lieu : Germany
Inscription : 2013-04-02
Messages : 52
Site Web

Hy at all pilots and engineers^^

I proudly pronounce to logged in succesfully in your Forum, Emmanuel!

Hy @All i am new to FG since a couple of month and try to enhance
some of the great models from helijah. hope i get some tricks in here,
but first i have to take a look around

good flight
cpt Goosnen

Hors ligne

#2 2013-06-21 09:57:56

Helijah
Administrateur
Lieu : Chartres
Inscription : 2011-12-14
Messages : 2 011
Site Web

Re : Hy at all pilots and engineers^^

Welcome to you smile

Regards Emmanuel


Quelques avions pour FlightGear
http://helijah.free.fr

Hors ligne

#3 2013-06-21 11:07:29

Didier1963
Developpeur
Lieu : Poitiers
Inscription : 2012-10-24
Messages : 1 233

Re : Hy at all pilots and engineers^^

Welcome in board Capt'n,

so I supose that you speak fluently French ?
No? How come?

No wories, here we are couple of guys who have some knowledge in your language (& know how to use www.reverso.net siffle)
Witch country/continent are you from?

With a nikname like yours I suppose that you fly seaplanes?


Pourquoi cet avatar : il a réussi à les arrêter LUI au moins.......
Amicalement, Didier, Poitiers 86; LFBI alt 129m, 46°35'22.9"N 0°18'32.7"E
"Ils ne savaient pas que c'était impossible, alors ils l'on fait" Marc Twain

Hors ligne

#4 2013-06-21 17:13:19

cpt Goosnen
Créateur
Lieu : Germany
Inscription : 2013-04-02
Messages : 52
Site Web

Re : Hy at all pilots and engineers^^

hey, well i am from germany, but my french knowledge in vacation is based on my better half^^ so i hope that english is ok for u all
i dont like translators cause they are often causing more troubles, but thanks for the link :~) i will see if thats one who dont cause much troubles.

and good combined big_smile i am not a real pilot but since i was flying as a little boy with one i definently stuck on that type of planes yepp!

regards and have a nice midsummernight@ all
Tobias alias Goosnen

Hors ligne

#5 2013-06-22 14:40:16

C-VALL
Developpeur
Inscription : 2012-11-15
Messages : 611

Re : Hy at all pilots and engineers^^

Welcome aboard cpt!
As a matter of fact you will find a lot of tricks and suggestions up here. I am myself from Canada and feel at ease with the frenchies. Great team to work with.


In Vino Veritas

Hors ligne

#6 2013-06-22 21:02:13

Didier1963
Developpeur
Lieu : Poitiers
Inscription : 2012-10-24
Messages : 1 233

Re : Hy at all pilots and engineers^^

Hééééééééé,

Un revenant!!!!! Happy to hear again about you, tabernac ed' calisssss !

Alors Gaêtan, et cette config Mac, ça se concrétise ?
So, G. this MAc setup, is it inproving?
Je viens ENFIN, hier soir, d'arriver à utiliser ma carte graphique ATI Radeon..................... avec un pilote proprio ATI/AMD.
I just manage, yesterday evening, to setup my additional GPU Radeon............... with ATI/AMD driver.
La différence??
Sans/without : 'so Intel graphic feature from the CPU
FG avec toutes le options décochée 8 fps !!!!
FG with all graphic feature deselected 8 fps.
Avec/with ATI :
FG avec TOUTES les options fraphiques cochées............. 16 fps !!
GF with ALL features selected................. 16 fps

C'est quand même plus beau, du coup................. France 850 en cours d'instalation !!
It is far more biutifull, then...........  France 850 instalation in couse !!

cheers


Pourquoi cet avatar : il a réussi à les arrêter LUI au moins.......
Amicalement, Didier, Poitiers 86; LFBI alt 129m, 46°35'22.9"N 0°18'32.7"E
"Ils ne savaient pas que c'était impossible, alors ils l'on fait" Marc Twain

Hors ligne

#7 2013-06-23 16:49:25

cpt Goosnen
Créateur
Lieu : Germany
Inscription : 2013-04-02
Messages : 52
Site Web

Re : Hy at all pilots and engineers^^

big_smile  "tabernac ed' calisssss" ! what?? blink

Yes C-VALL i think so  also

ps: i had a lot probs with the Radeon grafic too
till i found the basic grafic setting menue, now it works very fine i think
but a lot of yuggling till here ~ now 58 fps siffle

Hors ligne

#8 2013-06-23 17:15:01

Helijah
Administrateur
Lieu : Chartres
Inscription : 2011-12-14
Messages : 2 011
Site Web

Re : Hy at all pilots and engineers^^

Hi Tobias,

Lol. "tabernac" "calissss" : C-VAL is in Canada. And it are very specific French expressions at Canadian lol

Regards Emmanuel


Quelques avions pour FlightGear
http://helijah.free.fr

Hors ligne

#9 2013-06-23 17:19:03

cpt Goosnen
Créateur
Lieu : Germany
Inscription : 2013-04-02
Messages : 52
Site Web

Re : Hy at all pilots and engineers^^

hehehe, ok the translator sayd its portugese xD but didnt translate anything,

Hors ligne

#10 2013-06-23 18:46:55

Didier1963
Developpeur
Lieu : Poitiers
Inscription : 2012-10-24
Messages : 1 233

Re : Hy at all pilots and engineers^^

Just for the fun & your info.
Our Canadian cousins are using worlds initialy from catholic religon to swear. Like the F word in English but light version.

Calisse is the kind of cup wich receve "Christ blood" (in fact, Christ is as well used as swear word).
Ostie is this kind of round & flat peace of bread.
Tabernacle is the furniture where the prist put the Calisse after use.

So, of couse, you will have trouble to find the meaning of these words. Now with the right orthographe it might be better, no?

By the way, could you please give détails on the way you manage to setup your Radeon GPU?
Are you under Wondows on GNU-Linix?

Vielen Dank


Pourquoi cet avatar : il a réussi à les arrêter LUI au moins.......
Amicalement, Didier, Poitiers 86; LFBI alt 129m, 46°35'22.9"N 0°18'32.7"E
"Ils ne savaient pas que c'était impossible, alors ils l'on fait" Marc Twain

Hors ligne

#11 2013-06-23 19:31:28

cpt Goosnen
Créateur
Lieu : Germany
Inscription : 2013-04-02
Messages : 52
Site Web

Re : Hy at all pilots and engineers^^

haha ok, well my radeon is a stoneold, its radeon 700 lol no updates of this card are available, which was the point i get into it and tryd to find out how i can setup the card. I using Win xp and everytime i am near citys (or it loads a lot others) the cpu is at 100%

^^ but now the fps dont go under 18-15 when its on 100%

do u know where u can setup ur card?

i will take a look and make a screenshot

Hors ligne

#12 2013-06-23 19:59:00

cpt Goosnen
Créateur
Lieu : Germany
Inscription : 2013-04-02
Messages : 52
Site Web

Re : Hy at all pilots and engineers^^

it should be in your Display Settings and hides at win xp, behind a simple little "extended settings" button!!!
it takes me alot time to find that out too..... then u have to look at a guide website which is the right performance setting for ur system! (Maybe theres something in fg forum or wiki, but anyway, all this dont get me to the setup i have now)

i tryd the sliders in evry combination, and just as i had them a lit better than the default setup AND!! deactivate the buffers
it gets me to fps of more than 100 (sometimes it was at 1500!!) and the cpu was running at 100% again...

so i have the fps throttel ingame now at 60fps and it runs very very fluid

here is the screen but i dont think it helps u much smile

konfigsljyv.png
thats the "extended settings" menue i found in "Display settings" menue


bonne chance
Tobi

Hors ligne

#13 2013-06-23 20:02:28

cpt Goosnen
Créateur
Lieu : Germany
Inscription : 2013-04-02
Messages : 52
Site Web

Re : Hy at all pilots and engineers^^

AH and btw: deactivate trees and !Aktivate! Random objects!

that was descripted in Forum, and helps also ;~)

Hors ligne

#14 2013-06-23 20:23:49

Didier1963
Developpeur
Lieu : Poitiers
Inscription : 2012-10-24
Messages : 1 233

Re : Hy at all pilots and engineers^^

The screen shot looks like Catalyst Control Center, the ATI/AMD GPU driver.
I'll have look later on.
I did not move a lot this week on the Akoya 3D improvment.
As Lionel & Dany are working like creasy on both FDM's, I'd like to send them something this week.

Thanks, I'll keep you informed


Pourquoi cet avatar : il a réussi à les arrêter LUI au moins.......
Amicalement, Didier, Poitiers 86; LFBI alt 129m, 46°35'22.9"N 0°18'32.7"E
"Ils ne savaient pas que c'était impossible, alors ils l'on fait" Marc Twain

Hors ligne

#15 2013-06-24 14:01:13

C-VALL
Developpeur
Inscription : 2012-11-15
Messages : 611

Re : Hy at all pilots and engineers^^

Hi cpt.
Following your questions about those strong words from Didier, here is the answer,
Helijah has given here a very good and polite answer and I will complete his answer.

Here we go in 3 distinct steps:

In 1534, shortly after Christopher Columbus, Europeans from many countries went to discover the american continent to establish themselves in a new country. France discoverd the East coast of the continent. Other countries also established themselves. Shortly after, the brits came and won all the battles for the continent.
This left few french colonies that gathered in a territory that became the province of Quebec where they kept their culture and religion while the surroundings was english and protstant. This explains you why I am bilingual but french originated.

Now those square words from Didier. When things would go bad in the fields or during construction (a hammer hit on a finger), curses with fly right away and it was with church words, prohibited by the priests. Prohibite something and people will do it.

Now the case of Didier. While in the army, Didier worked with French Canadians where he would learn quickly all those dirty things, being pround to shoot them back, cause he feel's happy. Dont worry, when  I tickle one of the guys a bit they become distant and icy.
Hé! hé! could not let this one pass.

(By the way while at college I had a german friend where I learned lots of prohibited words from your culture but ythis site is not dedicated to dictionary words so….)

Ho! Didier, fais quand même gaffe bordel! On n'est pas dans une auberge ici!

Dernière modification par C-VALL (2013-06-24 14:06:10)


In Vino Veritas

Hors ligne

#16 2013-06-24 15:36:01

Didier1963
Developpeur
Lieu : Poitiers
Inscription : 2012-10-24
Messages : 1 233

Re : Hy at all pilots and engineers^^

No problems, Gaëtan,

sorry if I hurt you ! afraid

I'm sure that Tobias took it as a joke & not as bad talking. He would have told me then. interrogation
& for sure Emmanuel would have told me as well, to moderate my words.
My way to see it is we can have some humour from time to time, as much as we stay respectfully & polite.

By the way, Gaëtan, "Bordel" est un gros mot en français !!! siffle

Dernière modification par Didier1963 (2013-06-24 15:38:52)


Pourquoi cet avatar : il a réussi à les arrêter LUI au moins.......
Amicalement, Didier, Poitiers 86; LFBI alt 129m, 46°35'22.9"N 0°18'32.7"E
"Ils ne savaient pas que c'était impossible, alors ils l'on fait" Marc Twain

Hors ligne

#17 2013-06-24 17:06:30

C-VALL
Developpeur
Inscription : 2012-11-15
Messages : 611

Re : Hy at all pilots and engineers^^

Sorry Didier but if "bordel" (bordello)  is a big word in France, not in Québec.
And above all we have to put to word in its context.
You were happy to hear from me again and I appreciate it.
Regards.

Bon passons aux choses sérieuses sti!


In Vino Veritas

Hors ligne

#18 2013-06-24 17:43:52

Didier1963
Developpeur
Lieu : Poitiers
Inscription : 2012-10-24
Messages : 1 233

Re : Hy at all pilots and engineers^^

Ha bon? On n'était pas sérieux là?.................;:lol:


Pourquoi cet avatar : il a réussi à les arrêter LUI au moins.......
Amicalement, Didier, Poitiers 86; LFBI alt 129m, 46°35'22.9"N 0°18'32.7"E
"Ils ne savaient pas que c'était impossible, alors ils l'on fait" Marc Twain

Hors ligne

#19 2013-06-24 17:53:50

cpt Goosnen
Créateur
Lieu : Germany
Inscription : 2013-04-02
Messages : 52
Site Web

Re : Hy at all pilots and engineers^^

hehehe, okok, nice explanation xD
but of course i know that in large areas of the beautifull wooden country your life in, the people speak french wink
and of course i cheked it that it was yoked, but first i thought u ment me didier so i had to ask ;~)

C-VALL are u near to Goosbay then??

btw, if one of u needs input for staying out of political discussions ^^
i have found this incredible site of projects..
http://petersgasse36.blogspot.de/2012/0 … rafts.html

(the best comes at last)

Hors ligne

#20 2013-06-24 20:50:03

Didier1963
Developpeur
Lieu : Poitiers
Inscription : 2012-10-24
Messages : 1 233

Re : Hy at all pilots and engineers^^

Yessssss,

nice one !!

I know someone who knows already few of these planes & will like the others (in cas he see them for the first time, but I doubt!!!)
that's exactly is "cup of tea".

Nice to watch just before going to sleep & have nice dreams!!!


Pourquoi cet avatar : il a réussi à les arrêter LUI au moins.......
Amicalement, Didier, Poitiers 86; LFBI alt 129m, 46°35'22.9"N 0°18'32.7"E
"Ils ne savaient pas que c'était impossible, alors ils l'on fait" Marc Twain

Hors ligne

#21 2013-06-24 20:52:49

5H1N0B1
Developpeur
Inscription : 2012-08-07
Messages : 597

Re : Hy at all pilots and engineers^^

Welcome here dude smile

Hors ligne

#22 2013-06-25 12:09:41

cpt Goosnen
Créateur
Lieu : Germany
Inscription : 2013-04-02
Messages : 52
Site Web

Re : Hy at all pilots and engineers^^

hey thx, & yepp i hoped so^^
i was also suprised about some of the concepts!!
mainly the x15 deltas and the horten rocketwing *wohoow

Hors ligne

Pied de page des forums

Propulsé par FluxBB 1.4.8