FlightGear - Création d'avions et autres / Creation of aircraft and other

Vous désirez aider à améliorer les avions de Hangar de Helijah, c'est ici que cela se passe / You would like to help improving aircraft from Helijah's hangar, this is where it happens

Vous n'êtes pas identifié(e).

#1 2015-02-01 16:51:20

D-ECHO
Créateur
Inscription : 2014-10-28
Messages : 125

Eclipse 550

After some request about light aircraft, now it gets a bit more heavy:
Can anyone please build the Eclipse 550, a light jet?
Heres an image:
Eclipse550
I would be happy if someone is interested in that jet!
Regards
D-ECHO

Dernière modification par D-ECHO (2015-02-01 16:52:01)

Hors ligne

#2 2015-02-01 16:56:09

Didier1963
Developpeur
Lieu : Bordeaux
Inscription : 2012-10-24
Messages : 1 238

Re : Eclipse 550

D-ECHO

This one have quite simple shape.

Wy don't you jump to Blender and attempt your first modeling??
There is tons of video tutorials on Youtube. Some are in German as well.

Emmanuel ans the complete team is here to help you if necessary.

OK, back to "Brigitte"........................

enjoy


Pourquoi cet avatar : il a réussi à les arrêter LUI au moins.......
Amicalement, Didier, Poitiers 86; LFBI alt 129m, 46°35'22.9"N 0°18'32.7"E
"Ils ne savaient pas que c'était impossible, alors ils l'on fait" Marc Twain

Hors ligne

#3 2015-02-01 16:57:30

D-ECHO
Créateur
Inscription : 2014-10-28
Messages : 125

Re : Eclipse 550

Well, since tomorrow Ill be away for three days, but Ill try after that!

Hors ligne

#4 2015-02-01 17:06:14

Helijah
Administrateur
Lieu : Chartres
Inscription : 2011-12-14
Messages : 2 030
Site Web

Re : Eclipse 550

Hey D-ECHO

I'll let you try. Then if you managed everything is best. Else, I could take over smile

Regards Emmanuel


Quelques avions pour FlightGear
http://helijah.free.fr

Hors ligne

#5 2015-02-01 17:08:34

Didier1963
Developpeur
Lieu : Bordeaux
Inscription : 2012-10-24
Messages : 1 238

Re : Eclipse 550

OK,

so it will be right there

Oups, sorry Emmanuel, I was writing wile you sent your message.
So this one is for D-ECHO

Dernière modification par Didier1963 (2015-02-01 17:10:05)


Pourquoi cet avatar : il a réussi à les arrêter LUI au moins.......
Amicalement, Didier, Poitiers 86; LFBI alt 129m, 46°35'22.9"N 0°18'32.7"E
"Ils ne savaient pas que c'était impossible, alors ils l'on fait" Marc Twain

Hors ligne

#6 2015-02-01 17:15:28

Didier1963
Developpeur
Lieu : Bordeaux
Inscription : 2012-10-24
Messages : 1 238

Re : Eclipse 550

D-ECHO,

Here is the X-Plane version :
http://asn-xp.aerosoft.com/?page_id=2131

and one little blueprint  :
http://www.the-blueprints.com/modules/v … on_550.jpg

http://www.aircharterservice.com/themes … 40)(3).jpg

Then ,where you got through with the 3D, you'll be able to feed the FDM with that :
http://www.aircharterservice.com/aircra … se-500-550

Dernière modification par Didier1963 (2015-02-01 17:26:53)


Pourquoi cet avatar : il a réussi à les arrêter LUI au moins.......
Amicalement, Didier, Poitiers 86; LFBI alt 129m, 46°35'22.9"N 0°18'32.7"E
"Ils ne savaient pas que c'était impossible, alors ils l'on fait" Marc Twain

Hors ligne

#7 2015-02-06 12:29:24

D-ECHO
Créateur
Inscription : 2014-10-28
Messages : 125

Re : Eclipse 550

Now, the last days, I have tried it, but I didnt get very far...
https://www.dropbox.com/s/wganyo2wh0b27 … y.jpg?dl=0
So Ill give this aircraft up and continue learning FDM and animation XML files (and maybe start modelling a more easy shaped aircraft smile )
D-ECHO

Dernière modification par D-ECHO (2015-02-06 16:55:41)

Hors ligne

#8 2015-02-06 21:26:03

Didier1963
Developpeur
Lieu : Bordeaux
Inscription : 2012-10-24
Messages : 1 238

Re : Eclipse 550

Why do you stop now, just at the beguining?

We can help you to understand how it is working. This forum is made also for that.
Can you explain what did you try to do, and what we see on this screenshot?

Did you extract the three view from the link I gave you, to make one front view, one side view & one top view?

I would suggest to beguine by the body first.
You can have a look on Emmanuel's tutorial right here

So, initielly, make a parallelepipoid from 10.19m long, 11.56m wide, 3.35m high.
But..... you have to see the left side of yoour aircraft on the "Front Ortho" view, and the front view of your aircraft on the "Left Ortho" view.
It will guide you to put your picture on the background.

If you don't understand how to do it, just ask we will explain you with more details.

In the tutorial, you will see how to beguine with a simple circle of about 32 faces and then extrude it from the nose to the tail.
eclips10.png
Not exactly from the tip of the nose but from the line about 0.5m from it.
then, you play with the front view & the top view to change the chape of the circle to the necessary sise.
eclips10.jpg

Keep it up..................


Pourquoi cet avatar : il a réussi à les arrêter LUI au moins.......
Amicalement, Didier, Poitiers 86; LFBI alt 129m, 46°35'22.9"N 0°18'32.7"E
"Ils ne savaient pas que c'était impossible, alors ils l'on fait" Marc Twain

Hors ligne

#9 2015-02-07 03:57:09

Didier1963
Developpeur
Lieu : Bordeaux
Inscription : 2012-10-24
Messages : 1 238

Re : Eclipse 550

So after few hours you shall obtain something like that :
eclips11.png

enjoy your week-end


Pourquoi cet avatar : il a réussi à les arrêter LUI au moins.......
Amicalement, Didier, Poitiers 86; LFBI alt 129m, 46°35'22.9"N 0°18'32.7"E
"Ils ne savaient pas que c'était impossible, alors ils l'on fait" Marc Twain

Hors ligne

#10 2015-02-07 06:55:13

D-ECHO
Créateur
Inscription : 2014-10-28
Messages : 125

Re : Eclipse 550

Okay, okay, Ill continue...
So here you see how I am trying to adjust the pictures: https://www.dropbox.com/s/djtgz036tkwrz … 1.jpg?dl=0
I hope this is right?
D-ECHO

#EDIT#
So this here is the first question:
I have now added a plane and scaled/translated it to the right place. But how to make it not just being a rectandgular, but like the red marked part???(image)
https://www.dropbox.com/s/w8rwry6ooqciz … 2.jpg?dl=0

@Emmanuel: Sorry, that I dont use your tutorial, but I dont understand really much French.

Dernière modification par D-ECHO (2015-02-07 07:06:33)

Hors ligne

#11 2015-02-07 07:09:38

Helijah
Administrateur
Lieu : Chartres
Inscription : 2011-12-14
Messages : 2 030
Site Web

Re : Eclipse 550

D-ECHO a écrit :

@Emmanuel: Sorry, that I dont use your tutorial, but I dont understand really much French.

Lol. That is why an English version exists : http://helijah.free.fr/flightgear/Creat … ion-en.htm

Regards Emmanuel


Quelques avions pour FlightGear
http://helijah.free.fr

Hors ligne

#12 2015-02-07 07:14:29

D-ECHO
Créateur
Inscription : 2014-10-28
Messages : 125

Re : Eclipse 550

Helijah a écrit :
D-ECHO a écrit :

@Emmanuel: Sorry, that I dont use your tutorial, but I dont understand really much French.

Lol. That is why an English version exists : http://helijah.free.fr/flightgear/Creat … ion-en.htm

Regards Emmanuel

Thanks!

Hors ligne

#13 2015-02-07 12:28:51

Didier1963
Developpeur
Lieu : Bordeaux
Inscription : 2012-10-24
Messages : 1 238

Re : Eclipse 550

D-ECHO,

I found a better 3view plan on the factory site :
http://www.eclipseaerospace.net/550.php

It is important to cut the picture right at the edges of the drawing (2 or 3 pixels on the drawing might be 5 or 5 cm on the modeling.
Do not forget to check if the drawing is at level (nose to hight compare to the tail, or tip of the right wing higier of the left wing).

I'm sure by now, the time I answear to your post, you have red Manu's tutorial.
So you have probably notices that, instead of square plane, you have to beguine the body by a circle :
eclips12.png
I have used the default setting of 32 but little bit less will do, around 24.

I told you that the shape of this plane was quite simple, the profile is almost circular all along the body, up to the back of the cabin, the it is ovoid (regular one, same width on top & on bottom).

Dernière modification par Didier1963 (2015-02-07 12:31:14)


Pourquoi cet avatar : il a réussi à les arrêter LUI au moins.......
Amicalement, Didier, Poitiers 86; LFBI alt 129m, 46°35'22.9"N 0°18'32.7"E
"Ils ne savaient pas que c'était impossible, alors ils l'on fait" Marc Twain

Hors ligne

#14 2015-02-07 22:23:54

Didier1963
Developpeur
Lieu : Bordeaux
Inscription : 2012-10-24
Messages : 1 238

Re : Eclipse 550

D-ECHO,

So, where are you so far with Blender.

I'm waiting for you, don't worry, I'm almost ready to take-off :

eclips13.png


............ ok, I'm joking, I just play little bit while waiting new for the Breguet 765 developement.


Pourquoi cet avatar : il a réussi à les arrêter LUI au moins.......
Amicalement, Didier, Poitiers 86; LFBI alt 129m, 46°35'22.9"N 0°18'32.7"E
"Ils ne savaient pas que c'était impossible, alors ils l'on fait" Marc Twain

Hors ligne

#15 2015-02-08 06:06:48

D-ECHO
Créateur
Inscription : 2014-10-28
Messages : 125

Re : Eclipse 550

First: Where I am: Well, unfortunately I havent started the right 3d modelling yet.
Why? I have no really idea, how to do this plane as in this image:

Can you please help me? Do I have to press special keys? Which mouse buttons do I have to use?
On YouTube there are videos, but I havent found any yet, where this is described, that I can understand it. afraid

Hors ligne

#16 2015-02-08 12:09:23

Didier1963
Developpeur
Lieu : Bordeaux
Inscription : 2012-10-24
Messages : 1 238

Re : Eclipse 550

Hi D-ECHO,

Ok, so how about a tutorial "Live" like we did with Gaëtan (C-Val) for the instrument of the Tu-444?

If you are ready to do it with me step by step, I can show you the way then you will be able to work by yourself.
Emmanuel will be arround to supervise and indicate mistakes or wrong stuff, and give us some tricks and bits.

Modeling is not so easy, but it is not this difficult.
Of cource, some knowledge on mechanical drawing, physics, aerodynamism can help, but it wont stop to.
I saw few sites where youg guy's are doing amasing things.

And anyway, it's by making mistakes that you learn how to use Blender (witch is by the way quite intuitive).

We can beguine with simple shape part of the plane :
pw610f10.jpg

The exhaust of the engine................................ naaaaaaa, I'm joking !
But in fact, as an exemple, this deflector is not this difficult. If you look carefully, you have the same "S" shape all around.
With Blender, you modelise one of the 15, then you have one tool to multiply it and set them in circle.

If we wanted to modelise the fan, witch is useless because we wont see details when its working, it will be the same way, modelise one blade and multiply by about 60, some thing like that, and then modelise the middle part.

So, it when ever you like......................

Dernière modification par Didier1963 (2015-02-08 12:12:26)


Pourquoi cet avatar : il a réussi à les arrêter LUI au moins.......
Amicalement, Didier, Poitiers 86; LFBI alt 129m, 46°35'22.9"N 0°18'32.7"E
"Ils ne savaient pas que c'était impossible, alors ils l'on fait" Marc Twain

Hors ligne

#17 2015-02-08 13:53:16

D-ECHO
Créateur
Inscription : 2014-10-28
Messages : 125

Re : Eclipse 550

First of all: Thank you very much for your help till now!
Unfortunately, I cant continue for the next few days, Im again away, but on Wednesday (or maybe Thursday) Ill try to go on.

Hors ligne

#18 2015-02-08 15:12:11

Didier1963
Developpeur
Lieu : Bordeaux
Inscription : 2012-10-24
Messages : 1 238

Re : Eclipse 550

No swet, take your time.

While you get ready, I'm training myself by making a version of the 550.
Today, I'm using the cutting machine to make doors (passenger and gears).

Little by little I'm learning from my mistakes, I had to redo the body 3 times to be abble to cut without too much surprises.
captur12.png


Pourquoi cet avatar : il a réussi à les arrêter LUI au moins.......
Amicalement, Didier, Poitiers 86; LFBI alt 129m, 46°35'22.9"N 0°18'32.7"E
"Ils ne savaient pas que c'était impossible, alors ils l'on fait" Marc Twain

Hors ligne

#19 2015-02-10 13:16:41

Didier1963
Developpeur
Lieu : Bordeaux
Inscription : 2012-10-24
Messages : 1 238

Re : Eclipse 550

OK,

we are almost ready to take off :

panel210.png

I'll use the MFD from the Tu-444 as they are looking similar, so I'll only have to make the central one.

This panel is the one from the 500, I just have to look further on the NET to change it.


.................. watch out ! The Gear handle is not yet here ! As well as the joysticks, so you'll have to do with the Auto Pilot.

I try also to make a basic FDM. I have to go back to my translation of Buckaro's tutorial.


Pourquoi cet avatar : il a réussi à les arrêter LUI au moins.......
Amicalement, Didier, Poitiers 86; LFBI alt 129m, 46°35'22.9"N 0°18'32.7"E
"Ils ne savaient pas que c'était impossible, alors ils l'on fait" Marc Twain

Hors ligne

#20 2015-02-10 18:05:33

Helijah
Administrateur
Lieu : Chartres
Inscription : 2011-12-14
Messages : 2 030
Site Web

Re : Eclipse 550

Superbe Didier smile

C'est génial je n'ai plus rien à faire moi smile Je regarde, j'admire et je me repose..........

Amicalement Emmanuel


Quelques avions pour FlightGear
http://helijah.free.fr

Hors ligne

#21 2015-02-10 18:48:43

Didier1963
Developpeur
Lieu : Bordeaux
Inscription : 2012-10-24
Messages : 1 238

Re : Eclipse 550

Arrête de chambrer !

Comment ça tu n'as plus rien à faire !!!

Et corriger mes c.........ies, alors !

Je t'envoie une copie du tar.gz dès que j'ai un semblant de début de FDM qui fonctionne.


Pourquoi cet avatar : il a réussi à les arrêter LUI au moins.......
Amicalement, Didier, Poitiers 86; LFBI alt 129m, 46°35'22.9"N 0°18'32.7"E
"Ils ne savaient pas que c'était impossible, alors ils l'on fait" Marc Twain

Hors ligne

#22 2015-02-11 15:21:40

D-ECHO
Créateur
Inscription : 2014-10-28
Messages : 125

Re : Eclipse 550

Well, Im back... and still hanging at the first tries of modelling. My stand is the same as in the last post. So can you tell me how to bring the plane into the form of the aircraft?
Regards

Hors ligne

#23 2015-02-11 15:36:00

Didier1963
Developpeur
Lieu : Bordeaux
Inscription : 2012-10-24
Messages : 1 238

Re : Eclipse 550

OK so in view to show every body how to do it, let's move in "Tutorial" section for this part (modeling)......

Right there

We will come back here for the rest of the development.


Pourquoi cet avatar : il a réussi à les arrêter LUI au moins.......
Amicalement, Didier, Poitiers 86; LFBI alt 129m, 46°35'22.9"N 0°18'32.7"E
"Ils ne savaient pas que c'était impossible, alors ils l'on fait" Marc Twain

Hors ligne

#24 2015-02-11 21:03:29

Artdes
Créateur
Lieu : Cherkasy (UA)
Inscription : 2012-08-13
Messages : 70
Site Web

Re : Eclipse 550

cant wait to fly this beauty


OS: GNU/Linux - Ubuntu - 64 Bit
CPU: AMD Athlon X2 - 215 - 2.7 GHz / 6 GB RAM
GFX-card: NVIDIA GeForce GT520 - V2 / LP - 1GB - DDR3

Hors ligne

#25 2015-02-11 21:11:05

Didier1963
Developpeur
Lieu : Bordeaux
Inscription : 2012-10-24
Messages : 1 238

Re : Eclipse 550

Well, if you said so,
I'm affraid that you will have to buy X-Plane and download the Eclipse 550 from Harranssor !!!!!! afraid

Or.........

Follow us and make one by yourself siffle


Pourquoi cet avatar : il a réussi à les arrêter LUI au moins.......
Amicalement, Didier, Poitiers 86; LFBI alt 129m, 46°35'22.9"N 0°18'32.7"E
"Ils ne savaient pas que c'était impossible, alors ils l'on fait" Marc Twain

Hors ligne

Pied de page des forums

Propulsé par FluxBB 1.4.8