FlightGear - Création d'avions et autres / Creation of aircraft and other

Vous désirez aider à améliorer les avions de Hangar de Helijah, c'est ici que cela se passe / You would like to help improving aircraft from Helijah's hangar, this is where it happens

Vous n'êtes pas identifié(e).

#26 2014-12-26 20:30:55

Helijah
Administrateur
Lieu : Chartres
Inscription : 2011-12-14
Messages : 2 030
Site Web

Re : Stemme Sky Sportster S6

Hey D-ECHO,

After some research, I found a picture rather good of the panel. so I corrected the size and position of the panel in the aircraft. The result (with the photo)
sportster-10.png

Regards Emmanuel


Quelques avions pour FlightGear
http://helijah.free.fr

Hors ligne

#27 2014-12-26 20:54:01

D-ECHO
Créateur
Inscription : 2014-10-28
Messages : 125

Re : Stemme Sky Sportster S6

I am looking forward to the first release smile

Hors ligne

#28 2014-12-27 00:41:32

Didier1963
Developpeur
Lieu : Bordeaux
Inscription : 2012-10-24
Messages : 1 238

Re : Stemme Sky Sportster S6

Manu,

je crois reconnaître des radio que j'ai modélisé pour l'Akoya. Juste à droite de l'écran LCD.
Tu peux donc les utiliser si tu ne les a pas déjà.

aero-2014-stemme-s6-cockpit.jpg.3872014.jpg

et quelques vidéos pour les petits détails :

https://www.youtube.com/watch?v=XBBvcDjWauI

https://www.youtube.com/watch?v=0SVOHBIfX_k

Dernière modification par Didier1963 (2014-12-27 01:19:39)


Pourquoi cet avatar : il a réussi à les arrêter LUI au moins.......
Amicalement, Didier, Poitiers 86; LFBI alt 129m, 46°35'22.9"N 0°18'32.7"E
"Ils ne savaient pas que c'était impossible, alors ils l'on fait" Marc Twain

Hors ligne

#29 2014-12-27 01:55:00

Helijah
Administrateur
Lieu : Chartres
Inscription : 2011-12-14
Messages : 2 030
Site Web

Re : Stemme Sky Sportster S6

Salut Didier,

Pour le moment je m'applique à apporter tout mon savoir dans les animations et la modélisation de l'ensemble smile Flexion des ailes, animation des trains etc.... Et puis malheureusement, malgré de nombreuses photos sur le net. Peu de chose est réellement utilisable. Beaucoup de projections sont donc nécessaires.... Là intervient ma petite expérience smile Mais merci pour l'offre. Je regarderais cela le moment venu smile

En attendant et pour vous faire patienter, voici la bête en l'état. Non réellement utilisable, mais testable sans peur smile

D-ECHO : In the meantime, and to make you wait, here is the beast in the state. Not really usable, but testable without fear smile

http://helijah.free.fr/blender/sportste … 014.tar.gz

Amicalement Emmanuel
Regards Emmanuel

P.S. Le plus difficile ici, je l'ai trouvé sur le site officiel de l'avion. Le tableau de bord n'est pas unique mais totalement configurable selon les besoins des l'acheteurs. Du coup il va exister autant de tableaux de bord différent qu'il existe d'avion en photo. Il est impossible de se fier à ce que l'on trouve.


Quelques avions pour FlightGear
http://helijah.free.fr

Hors ligne

#30 2014-12-27 10:05:10

D-ECHO
Créateur
Inscription : 2014-10-28
Messages : 125

Re : Stemme Sky Sportster S6

Here are the first results of my cockpit work:
(circuitbrakers have still problems, are out at startup)
<!-- ALT; from the ASK13 -->
  <model>
    <path>Aircraft/Sky-sportster/Models/Interior/Panel/Instruments/alti-4110/winter-4110.xml</path>
    <offsets>
      <x-m>  0.000 </x-m>
      <y-m> -0.206 </y-m>
      <z-m> -0.049 </z-m>
    </offsets>
  </model>
    <!-- AI -->
  <model>
    <path>Aircraft/Instruments-3d/ai/ai.xml</path>
    <offsets>
      <x-m>  0.009 </x-m> <!-- back-->
      <y-m> -0.206 </y-m> <!--right-->
      <z-m> 0.049 </z-m><!--up-->
    </offsets>
  </model>

     <!-- AR-2301; from the ASK13 -->
  <model>
    <path>Aircraft/Sky-sportster/Models/Interior/Panel/Instruments/ar-3201/ar-3201.xml</path>
    <offsets>
      <x-m>  0.00 </x-m> <!-- back-->
      <y-m> -0.12 </y-m> <!--right-->
      <z-m> -0.051 </z-m><!--up-->
    </offsets>
  </model>
       <!-- AR-2301; also from ASK13 -->
  <model>
    <path>Aircraft/Sky-sportster/Models/Interior/Panel/Instruments/ar-3201/ar-3201.xml</path>
    <offsets>
      <x-m>  0.00 </x-m> <!-- back-->
      <y-m> -0.12 </y-m> <!--right-->
      <z-m> 0.016 </z-m><!--up-->
    </offsets>
  </model>

  <!--Magneto-->
    <model>
    <path>Aircraft/Instruments-3d/magneto-switch/mags.xml</path>
    <offsets>
      <x-m>  0.00 </x-m> <!-- back-->
      <y-m> 0.055 </y-m> <!--right-->
      <z-m> -0.116 </z-m><!--up-->
    </offsets>
  </model>
  <!--Circuitbreakers; taken from the Diamond-Da42-->
  <!--Part 1-->
   <model>
    <path>Aircraft/Sky-sportster/Models/Interior/Panel/Instruments/circuitbreakers/cbleftbat.xml</path>
    <offsets>
      <x-m>  0.00 </x-m> <!-- back-->
      <y-m> 0.203 </y-m> <!--right-->
      <z-m> -0.116 </z-m><!--up-->
    </offsets>
  </model>
     <model>
    <path>Aircraft/Sky-sportster/Models/Interior/Panel/Instruments/circuitbreakers/cbrightbat.xml</path>
    <offsets>
      <x-m>  0.00 </x-m> <!-- back-->
      <y-m> 0.237 </y-m> <!--right-->
      <z-m> -0.116 </z-m><!--up-->
    </offsets>
  </model>
  <!--Part 2-->
  <!--Column 1-->
       <model>
    <path>Aircraft/Sky-sportster/Models/Interior/Panel/Instruments/circuitbreakers/cbstallwrn.xml</path>
    <offsets>
      <x-m>  0.00 </x-m> <!-- back-->
      <y-m> 0.27 </y-m> <!--right-->
      <z-m> 0.025 </z-m><!--up-->
    </offsets>
  </model>
    <!--Column 2-->
   <model>
    <path>Aircraft/Sky-sportster/Models/Interior/Panel/Instruments/circuitbreakers/cbpitot.xml</path>
   
    <name>CbPitot</name>
    <offsets>
      <x-m>  0.00 </x-m> <!-- back-->
      <y-m> 0.3 </y-m> <!--right-->
      <z-m> 0.025 </z-m><!--up-->
    </offsets>
  </model>

       <model>
    <path>Aircraft/Sky-sportster/Models/Interior/Panel/Instruments/circuitbreakers/cbavionicbus.xml</path>
    <offsets>
      <x-m>  0.00 </x-m> <!-- back-->
      <y-m> 0.3 </y-m> <!--right-->
      <z-m> 0.005 </z-m><!--up-->
    </offsets>
  </model>
      <model>
    <path>Aircraft/Sky-sportster/Models/Interior/Panel/Instruments/circuitbreakers/cbavionicctrl.xml</path>
    <offsets>
      <x-m>  0.00 </x-m> <!-- back-->
      <y-m> 0.3 </y-m> <!--right-->
      <z-m> -0.015 </z-m><!--up-->
    </offsets>
  </model>
      <model>
    <path>Aircraft/Sky-sportster/Models/Interior/Panel/Instruments/circuitbreakers/cbcom1.xml</path>
    <offsets>
      <x-m>  0.00 </x-m> <!-- back-->
      <y-m> 0.3 </y-m> <!--right-->
      <z-m> -0.035 </z-m><!--up-->
    </offsets>
  </model>
      <model>
    <path>Aircraft/Sky-sportster/Models/Interior/Panel/Instruments/circuitbreakers/cbcom2.xml</path>
    <offsets>
      <x-m>  0.00 </x-m> <!-- back-->
      <y-m> 0.3 </y-m> <!--right-->
      <z-m> -0.052 </z-m><!--up-->
    </offsets>
  </model>
     <model>
    <path>Aircraft/Sky-sportster/Models/Interior/Panel/Instruments/circuitbreakers/cbinstlight.xml</path>
    <offsets>
      <x-m>  0.00 </x-m> <!-- back-->
      <y-m> 0.3 </y-m> <!--right-->
      <z-m> -0.069 </z-m><!--up-->
    </offsets>
  </model>
     <model>
    <path>Aircraft/Sky-sportster/Models/Interior/Panel/Instruments/circuitbreakers/cblandinglight.xml</path>
    <offsets>
      <x-m>  0.00 </x-m> <!-- back-->
      <y-m> 0.3 </y-m> <!--right-->
      <z-m> -0.087 </z-m><!--up-->
    </offsets>
  </model>
     <model>
    <path>Aircraft/Sky-sportster/Models/Interior/Panel/Instruments/circuitbreakers/cbenginstr.xml</path>
    <offsets>
      <x-m>  0.00 </x-m> <!-- back-->
      <y-m> 0.3 </y-m> <!--right-->
      <z-m> -0.105 </z-m><!--up-->
    </offsets>
  </model>
   <!--Column 3-->
   <model>
    <path>Aircraft/Sky-sportster/Models/Interior/Panel/Instruments/circuitbreakers/cbflap.xml</path>
    <offsets>
      <x-m>  0.00 </x-m> <!-- back-->
      <y-m> 0.325 </y-m> <!--right-->
      <z-m> 0.025 </z-m><!--up-->
    </offsets>
  </model>
       <model>
    <path>Aircraft/Sky-sportster/Models/Interior/Panel/Instruments/circuitbreakers/cbgearctrl.xml</path>
    <offsets>
      <x-m>  0.00 </x-m> <!-- back-->
      <y-m> 0.325 </y-m> <!--right-->
      <z-m> 0.005 </z-m><!--up-->
    </offsets>
  </model>
      <model>
    <path>Aircraft/Sky-sportster/Models/Interior/Panel/Instruments/circuitbreakers/cbgearwrn.xml</path>
    <offsets>
      <x-m>  0.00 </x-m> <!-- back-->
      <y-m> 0.325 </y-m> <!--right-->
      <z-m> -0.015 </z-m><!--up-->
    </offsets>
  </model>
      <model>
    <path>Aircraft/Sky-sportster/Models/Interior/Panel/Instruments/circuitbreakers/cbdme.xml</path>
    <offsets>
      <x-m>  0.00 </x-m> <!-- back-->
      <y-m> 0.325 </y-m> <!--right-->
      <z-m> -0.035 </z-m><!--up-->
    </offsets>
  </model>
      <model>
    <path>Aircraft/Sky-sportster/Models/Interior/Panel/Instruments/circuitbreakers/cbgpsnav1.xml</path>
    <offsets>
      <x-m>  0.00 </x-m> <!-- back-->
      <y-m> 0.325 </y-m> <!--right-->
      <z-m> -0.052 </z-m><!--up-->
    </offsets>
  </model>
     <model>
    <path>Aircraft/Sky-sportster/Models/Interior/Panel/Instruments/circuitbreakers/cbgpsnav2.xml</path>
    <offsets>
      <x-m>  0.00 </x-m> <!-- back-->
      <y-m> 0.325 </y-m> <!--right-->
      <z-m> -0.069 </z-m><!--up-->
    </offsets>
  </model>
     <model>
    <path>Aircraft/Sky-sportster/Models/Interior/Panel/Instruments/circuitbreakers/cbtaxilight.xml</path>
    <offsets>
      <x-m>  0.00 </x-m> <!-- back-->
      <y-m> 0.325 </y-m> <!--right-->
      <z-m> -0.087 </z-m><!--up-->
    </offsets>
  </model>
     <model>
    <path>Aircraft/Sky-sportster/Models/Interior/Panel/Instruments/circuitbreakers/cbaudio.xml</path>
    <offsets>
      <x-m>  0.00 </x-m> <!-- back-->
      <y-m> 0.325 </y-m> <!--right-->
      <z-m> -0.105 </z-m><!--up-->
    </offsets>
  </model>

  <!--RPM-->
    <model>
    <path>Aircraft/Instruments-3d/tach/tach.xml</path>
    <offsets>
      <x-m>  0.001 </x-m> <!-- back-->
      <y-m> 0.12 </y-m> <!--right-->
      <z-m> 0.09 </z-m><!--up-->
    </offsets>
  </model>
    <!--Hobbs; from the Diamond-Da40 -->
    <model>
    <path>Aircraft/Sky-sportster/Models/Interior/Panel/Instruments/hobbs/hobbs.xml</path>
    <offsets>
      <x-m>  0.001 </x-m> <!-- back-->
      <y-m> 0.27 </y-m> <!--right-->
      <z-m> 0.06 </z-m><!--up-->
    </offsets>
  </model>
   <!--ELT from the DR400-->
    <model>
    <path>Aircraft/Sky-sportster/Models/Interior/Panel/Instruments/elt/ArtexELT.xml</path>
    <offsets>
      <x-m>  0.00 </x-m> <!-- back-->
      <y-m> 0.221 </y-m> <!--right-->
      <z-m> 0.1 </z-m><!--up-->
    </offsets>
  </model>

Hors ligne

#31 2014-12-28 03:25:20

Helijah
Administrateur
Lieu : Chartres
Inscription : 2011-12-14
Messages : 2 030
Site Web

Re : Stemme Sky Sportster S6

Hi all,

Few instruments later :
sportster-11.png

A vous de juger de la chose smile
http://helijah.free.fr/blender/sportste … 014.tar.gz

Regards Emmanuel


Quelques avions pour FlightGear
http://helijah.free.fr

Hors ligne

#32 2014-12-28 07:20:05

D-ECHO
Créateur
Inscription : 2014-10-28
Messages : 125

Re : Stemme Sky Sportster S6

Wow!

Hors ligne

#33 2014-12-28 11:56:06

Didier1963
Developpeur
Lieu : Bordeaux
Inscription : 2012-10-24
Messages : 1 238

Re : Stemme Sky Sportster S6

Heeeeeeeee, t'as oublié une visse en haut à droite de l'altimètre !!!!!

Bhein oui, Manu, fallait bien trouver quelque chose à dire !!!

Nan mais c'est très jouli, peut-être........... un cadre de Garmin un peu plus sexy? ( dégradés d'ombres, rayures, usure de la peinture).

Heeeeeee, you forgot one screw on top right hand side of the altimeter !!!
He yes, I'd to find somethink to say !!!
No, but it is cute, maybe ....... a Garmin frame little bit more sexy? (shadows, scratches, peint worn out).


Pourquoi cet avatar : il a réussi à les arrêter LUI au moins.......
Amicalement, Didier, Poitiers 86; LFBI alt 129m, 46°35'22.9"N 0°18'32.7"E
"Ils ne savaient pas que c'était impossible, alors ils l'on fait" Marc Twain

Hors ligne

#34 2014-12-28 12:18:42

D-ECHO
Créateur
Inscription : 2014-10-28
Messages : 125

Re : Stemme Sky Sportster S6

The tank is a bit smaller, can anyone tell me in which unit the capacity in the yasim file is?
(at the moment, its like this
  <!-- Tank 26 liters -->
  <tank x="1.8" y="0" z="-0.4" capacity="40.20"/>
)

Hors ligne

#35 2014-12-28 12:23:27

Didier1963
Developpeur
Lieu : Bordeaux
Inscription : 2012-10-24
Messages : 1 238

Re : Stemme Sky Sportster S6

As YASim have been developped by English speaking peoples, most of the units are from the British system.
Some other are from the aviation/navigation system.
That's for, when we, froggies, are programing in Xml (as an exemple), we have to put info to tell the FDM that we are in metric system.

Dernière modification par Didier1963 (2014-12-28 12:45:42)


Pourquoi cet avatar : il a réussi à les arrêter LUI au moins.......
Amicalement, Didier, Poitiers 86; LFBI alt 129m, 46°35'22.9"N 0°18'32.7"E
"Ils ne savaient pas que c'était impossible, alors ils l'on fait" Marc Twain

Hors ligne

#36 2014-12-28 12:26:47

Didier1963
Developpeur
Lieu : Bordeaux
Inscription : 2012-10-24
Messages : 1 238

Re : Stemme Sky Sportster S6

If you don't have it already, I would advise you to find Bukaro's tuto about YASim.
I had to translate some for our French speaking friends.
Thet are realy detailed.
The link are somewhere in one of our topic, but I don't remener which one. Maybe Emmanuel will tell you where to find it.

For my part, before to put my nose deeper on it, I simply go to the "Debug" menu in FG (the one on right side of "Multiplayer"), then to "Internal properties", and I look to the property I wich to use. Most of the time, the unit(s) used is(are) mentionned at the end of the property name.

Then, I put "Factor" just below it in Xml file, that I try to guess the aproximated correct value, to get my instrument needle moving on the metric background.

Dernière modification par Didier1963 (2014-12-28 13:03:15)


Pourquoi cet avatar : il a réussi à les arrêter LUI au moins.......
Amicalement, Didier, Poitiers 86; LFBI alt 129m, 46°35'22.9"N 0°18'32.7"E
"Ils ne savaient pas que c'était impossible, alors ils l'on fait" Marc Twain

Hors ligne

#37 2014-12-28 13:05:33

Didier1963
Developpeur
Lieu : Bordeaux
Inscription : 2012-10-24
Messages : 1 238

Re : Stemme Sky Sportster S6

PS : here are the link to Bukaro's tutos :
http://embaranger.free.fr/viewtopic.php?pid=2657#p2657


Pourquoi cet avatar : il a réussi à les arrêter LUI au moins.......
Amicalement, Didier, Poitiers 86; LFBI alt 129m, 46°35'22.9"N 0°18'32.7"E
"Ils ne savaient pas que c'était impossible, alors ils l'on fait" Marc Twain

Hors ligne

#38 2014-12-28 13:22:25

D-ECHO
Créateur
Inscription : 2014-10-28
Messages : 125

Re : Stemme Sky Sportster S6

Thank you very much, Didier1963!
I have read the tutorials and found out that its in pounds.
One question: How old do you think am I?

Hors ligne

#39 2014-12-28 13:39:38

Didier1963
Developpeur
Lieu : Bordeaux
Inscription : 2012-10-24
Messages : 1 238

Re : Stemme Sky Sportster S6

D-ECHO a écrit :

One question: How old do you think am I?

The answer shall be exactly there

So, I would say old enough to be able to read and write English!

OK,a guess based on the spirit of you question : 15 year, 8 months and 11 days (don't as me for the hours/minutes/secounds I was not there when you came out lol )

Dernière modification par Didier1963 (2014-12-28 13:40:09)


Pourquoi cet avatar : il a réussi à les arrêter LUI au moins.......
Amicalement, Didier, Poitiers 86; LFBI alt 129m, 46°35'22.9"N 0°18'32.7"E
"Ils ne savaient pas que c'était impossible, alors ils l'on fait" Marc Twain

Hors ligne

#40 2014-12-28 13:47:04

D-ECHO
Créateur
Inscription : 2014-10-28
Messages : 125

Re : Stemme Sky Sportster S6

Didier1963 a écrit :

The answer shall be exactly there

Oh! :-o

Didier1963 a écrit :

OK,a guess based on the spirit of you question : 15 year, 8 months and 11 days (don't as me for the hours/minutes/secounds I was not there when you came out lol )

lol Im much younger, but I wont exactly say my age... I can tell you that Im more than 1 year younger...

Hors ligne

#41 2014-12-28 15:00:52

Helijah
Administrateur
Lieu : Chartres
Inscription : 2011-12-14
Messages : 2 030
Site Web

Re : Stemme Sky Sportster S6

Hi all. Salut à vous,

Oui Didier, je n'ai pas eu le courage d'ajouter une visse à l'altimètre smile Mais bon. Deux visses en diagonale c'est mécaniquement suffisant na d'abord !
Yes Didier, I did not have the courage to add a screw to the Altimeter smile Anyway, two screws in diagonally are mechanically sufficient !

De mon coté, je continue un peu l'ajout d'instruments. Voici le résultat :
From my side, I continue a little adding instruments. Here is the result:
sportster-12.png

Je pense que je vais faire une première version officielle pour mon hangar. Il est temps.
I think I'll make a first official version for my hangar. It is time.

Amicalement Emmanuel


Quelques avions pour FlightGear
http://helijah.free.fr

Hors ligne

#42 2014-12-28 15:52:01

Didier1963
Developpeur
Lieu : Bordeaux
Inscription : 2012-10-24
Messages : 1 238

Re : Stemme Sky Sportster S6

Alors, tu n'en veux pas de ma radios Becker AR4201?
Et mon Xpender Becker ATC4401?
Ils sont à revoir pour le nombre de points et faces, mais je crois me rappeler que j’étais arrivé à les faire fonctionner.
Et j'avais eu l'autorisation de Becker de la modéliser et utiliser pour FG comme Freeware.

Dernière modification par Didier1963 (2014-12-28 15:53:51)


Pourquoi cet avatar : il a réussi à les arrêter LUI au moins.......
Amicalement, Didier, Poitiers 86; LFBI alt 129m, 46°35'22.9"N 0°18'32.7"E
"Ils ne savaient pas que c'était impossible, alors ils l'on fait" Marc Twain

Hors ligne

#43 2014-12-28 16:36:16

Didier1963
Developpeur
Lieu : Bordeaux
Inscription : 2012-10-24
Messages : 1 238

Re : Stemme Sky Sportster S6

I just had look in Akoya 1.07 version folder.
The Xpender ATC-4401 (April 2013) need modifications. That was my beguinings with instrument modeling and programming.
becker10.png
I've already modifiyed the texture to remove the alpha chanel and change the LCD digits.
I've as well modifiyed the background 3D to make the necessary faces.
I try the new version in the BR-765 and let you know.

Je viens juste de jetter un oeïl dans le dossier Akoya version 1.07.
le transpondeur ATC-4401 a besoins de modifications. C'était mes début dans la modélisation et programmation d'instruments.
J'ai déjà modifier le fichier texture en supprimant le canal alpha et changé les chiffres LCD.
J'ai aussi modifié le fond en ajoutant les faces nécessaires.
J'aissaye le nouvelle mouture dans le BR-765 et te tiens au jus.
Il y aura probablement encore du travail côté programmation.....

HAAAAAAAAAAAAAAA, damned, j'ai oublié les vis !!!!!!!!

Dernière modification par Didier1963 (2014-12-28 16:36:50)


Pourquoi cet avatar : il a réussi à les arrêter LUI au moins.......
Amicalement, Didier, Poitiers 86; LFBI alt 129m, 46°35'22.9"N 0°18'32.7"E
"Ils ne savaient pas que c'était impossible, alors ils l'on fait" Marc Twain

Hors ligne

#44 2014-12-28 17:07:37

Helijah
Administrateur
Lieu : Chartres
Inscription : 2011-12-14
Messages : 2 030
Site Web

Re : Stemme Sky Sportster S6

Ils auront leur place sur le tableau de bord Didier smile Mais je ne sais pas où je les ai mis lol


Quelques avions pour FlightGear
http://helijah.free.fr

Hors ligne

#45 2014-12-28 17:24:33

Didier1963
Developpeur
Lieu : Bordeaux
Inscription : 2012-10-24
Messages : 1 238

Re : Stemme Sky Sportster S6

OK, si tu n'as plus les derniers mails échangés sur l'Akoya, je te renvoie le fichier une foi modifié.
Là, je suis sur le Xml pour l'animation des boutons.
Les afficheurs LCD sont fonctionnels........... mais le bouton ne tourne pas autour de son axe. C déjà modifié.

Dernière modification par Didier1963 (2014-12-28 17:26:35)


Pourquoi cet avatar : il a réussi à les arrêter LUI au moins.......
Amicalement, Didier, Poitiers 86; LFBI alt 129m, 46°35'22.9"N 0°18'32.7"E
"Ils ne savaient pas que c'était impossible, alors ils l'on fait" Marc Twain

Hors ligne

#46 2014-12-28 17:27:44

D-ECHO
Créateur
Inscription : 2014-10-28
Messages : 125

Re : Stemme Sky Sportster S6

looks good, but the circuitbreakers, the elt and the "AR-2301"(see my post) are missing smile

Dernière modification par D-ECHO (2014-12-28 17:41:40)

Hors ligne

#47 2014-12-28 18:15:11

Helijah
Administrateur
Lieu : Chartres
Inscription : 2011-12-14
Messages : 2 030
Site Web

Re : Stemme Sky Sportster S6

Hi D-ECHO.

Remake all the 3D of an instrument so badly make that the 3201 in the ASK13 takes time. and the circuitbreakers of Da 40 have absolutely nothing to do with those of Stemme. Everything must be done from scratch smile

Regards Emmmanuel


Quelques avions pour FlightGear
http://helijah.free.fr

Hors ligne

#48 2014-12-28 23:47:02

Helijah
Administrateur
Lieu : Chartres
Inscription : 2011-12-14
Messages : 2 030
Site Web

Re : Stemme Sky Sportster S6

Salut à tous,
Hi all,

Ce soir (enfin ce matin vue l'heure smile ) 4 mises à jour et un nouveau modèle dans mon hangar.
Tonight (in fact this morning smile) 4 updates and a new model in my hangar.

Kamov Ka 50 (8 superbe livrées signées Gary BROWN)
Tupolev Tu SB2Bis-M103 (14 fantastiques livrée toujours signées Gary BROWN)
Grob Astir (mise à jour pour Rembrandt)
Ask 21 Mi (miuse à jour pour Rembrandt)

et bien sur

Stemme Sky Sportster S6 le nouveau modèle smile

Amicalement Emmanuel


Quelques avions pour FlightGear
http://helijah.free.fr

Hors ligne

#49 2014-12-29 06:55:51

D-ECHO
Créateur
Inscription : 2014-10-28
Messages : 125

Re : Stemme Sky Sportster S6

Great Aircraft, but why dont leave the picture on the panel?

Hors ligne

#50 2014-12-29 10:14:01

Helijah
Administrateur
Lieu : Chartres
Inscription : 2011-12-14
Messages : 2 030
Site Web

Re : Stemme Sky Sportster S6

hi D-ECHO

the licenses ... It is not possible to do everything and anything with pictures. smile


Quelques avions pour FlightGear
http://helijah.free.fr

Hors ligne

Pied de page des forums

Propulsé par FluxBB 1.4.8